Should you oversaw after ventilation

Clean the steam vent | to clean | Filter | Activated carbon filter | Grease filter | Metal filter | Grid | Stainless steel | Home remedies

An extractor hood should be cleaned regularly.

The extractor hood does a great job every day in the kitchen, where it filters odors and greasy steam from cooking from the air. But it is precisely this fat that pollutes the steam vent relatively quickly. Grease residues then clog the filters so that the ventilation barely works or old grease drips down. To avoid this and to keep the extractor hood permanently functional and hygienically clean, it should be cleaned regularly. In this article, you can find out how you can best proceed with cleaning and what you should pay attention to when doing so.

Why does the steam exhaust have to be cleaned?

In most households, the extractor does its job every day. Frequent frying and cooking leave clear traces: after a short time, fat and dirt particles are deposited on the grid and on the filter, which not only look unsightly and create a breeding ground for germs, but also reduce the performance of the device. Because the more fat the filter absorbs from the kitchen vapors, the less it can do over time. In addition, old, dripping grease doesn't just look disgusting; Excessive amounts of it also pose a fire hazard in the extractor hood. Regular cleaning ensures that it functions correctly and extends the service life of your steam extractor.

Regular cleaning of the steam vent

Regular cleaning of the extractor hood - especially the grease filter - is important to ensure that it functions optimally. But what does "regularly" mean? How often should such a cleaning be done? Basically, the more often the steam extractor is used, the more often it has to be cleaned. The way in which it is cooked is also relevant: Do you cook fatty food every day or do you cook low-fat? If you use a lot of fat when cooking and roasting, the hood will become soiled more quickly and will have to be cleaned more frequently. As a rule of thumb, keep in mind that an extractor hood should be cleaned about once a month. This not only ensures hygienic cleanliness, but also prevents the dirt from sticking properly and later having to scrub much harder to loosen the grease deposits.

Different types of extractor hoods

The job of an extractor hood is to filter out odors and greasy vapors that arise during cooking and frying from the air. This air is sucked in by the hood, the fats it contains are filtered out and the air is then passed on. Depending on the operating mode, this forwarding of the air takes place differently. There are extractor hoods that transport kitchen vapors to the outside, while other models only clean the air and release it back into the interior. Since the different types of extractor hoods differ in their construction, they sometimes also require a different approach to cleaning.

Clean the exhaust air vent

An exhaust air steam extractor picks up the kitchen vapors and moisture from the kitchen and transports them outside. In order to properly clean a steam extractor hood with exhaust air duct, you should first remove the metal filter and scrub it thoroughly. While the grille with the filter is soaking or being cleaned in the dishwasher, you should remove grease from the interior of the extractor hood. You can wipe the external surfaces made of stainless steel with a soft microfiber cloth.

Clean circulating air or hybrid steam extractor

In contrast to an exhaust air steam extractor, a circulating air steam extractor filters grease and dirt out of the kitchen fumes and then returns the cleaned air to the room air. For this purpose, it is equipped with a special activated carbon filter, which must be cleaned or replaced regularly. There are also so-called hybrid steam extractors, which, so to speak, represent a combination of exhaust air and circulating air technology. With both variants, you must regularly clean both the metal and the grease filters and remove grease from the interior of the extractor hood. In addition, the activated charcoal filter, which works against odors, has to be cleaned or replaced. It goes without saying that dust, splashes of grease and other dirt must also be removed from the outer surfaces.

Clean the cooktop extractor

In addition to classic range hoods, there are also range hoods that are integrated directly into the hob. Of course, such a cooktop extractor must also be cleaned regularly. For the exact procedure, it is best to read the operating instructions for the device. Basically, however, the cleaning of a cooktop extractor works in such a way that you can remove the grease filter directly with a handle and then clean it either by hand or even very conveniently in the dishwasher.

Cleaning the steam vent - step by step

When cleaning the steam vent, all individual parts - inside and outside - should be thoroughly cleaned and freed from grease and dust. This is the only way to ensure optimal functionality, hygiene and cleanliness. The best way to clean it is as follows.

The right preparation

Before you start cleaning the extractor hood, you need to make the right preparations. Have all the utensils you need ready in advance so that you can work efficiently when cleaning yourself. In addition to a bucket of warm water and the appropriate cleaning agents, you should have enough rags or sponges ready. It is also advisable to cover the hob in advance so that it is not damaged when the extractor hood is cleaned. Towels are suitable for covering.

With the right preparation, you can clean your steam hood quickly and effectively.

Clean the grease filter, metal filter or activated carbon filter

Filters of all kinds are one of the most important components of the steam vent. They absorb the kitchen vapors from the air above the stove. The more you work, the more grease and dirt particles you filter, the sooner and more your performance will decrease. At some point these filters can no longer work well and filter less and less out of the air. In the first step, the metal filter should be cleaned, which can be easily removed from the hood with a click mechanism. Soak the metal filter in a mixture of hot water and washing-up liquid and remove the greasy residues with a washing-up brush after allowing it to take effect for a while. If that is not enough, you can clean heavily soiled grids with grease cleaner or oven spray. Alternatively, the metal filter can also be cleaned in the dishwasher using an intensive program.

Tip: You can only place lightly soiled metal filters vertically in the dishwasher; if they are heavily soiled, they should be placed horizontally.

In addition, the grease filter, a kind of fleece, should also be replaced every three to six months. This fibrous piece of fabric not only collects grease and dirt, but under certain circumstances also food scraps. Regular cleaning and replacement can prevent mold from forming.

In the case of a circulating air or hybrid hood, the activated carbon filter must also be replaced regularly. This usually cannot be cleaned, but usually needs to be replaced every three to six months.

Clean the cooker hood motor

One of the most important parts of the cooker hood is the motor. Since this is a sensitive electronic component, the motor itself should not be cleaned by laypeople. The maintenance and, if necessary, the replacement of the motor should be left to specialists who have experience and the necessary knowledge. However, you can carefully clean the outer casing of the motor and the ventilation housing yourself. This makes sense at the latest when old, liquid grease drips from the motor housing inside the extractor hood.

Clean the inside of the steam vent

After cleaning the individual parts of the steam vent, it is the turn of the interior. To clean it, warm water with washing-up liquid is usually sufficient. However, you should really remove all grease and other residue. The more thoroughly the interior is cleaned, the less fat can be deposited there in the long term, which would later be much more difficult to remove.

Clean the outside of the steam vent

Once the inside of the steam vent has been cleaned, go to the outside area. This should also be wiped off regularly and cleaned thoroughly so that the hood is hygienically clean from the outside and has a nice shine. The first step is cleaning with warm water and washing-up liquid. Other home remedies, special degreaser and professional cleaning agents are also possible. It is essential to consider the material of the steam exhaust when choosing the right cleaning agent. Most hoods are made of stainless steel or aluminum, some of which are made of glass; different cleaners can be used for this.

After you have thoroughly cleaned the outside of the hood, you should wipe it again with clear water and finally polish the surface dry so that it shines nicely.

The exterior of the steam extractor contributes to the flawless appearance of your kitchen.

Clean the stainless steel extractor hood

Stainless steel is a popular material for extractor hoods, which looks extremely noble thanks to its shiny silver surface. However, it can lose its noble character very quickly if it is covered with splashes of fat and sauce or fingerprints. For this reason, extractor hoods made of stainless steel must be cleaned frequently. You should avoid using aggressive cleaning agents or scratchy sponges in order not to damage or dull the stainless steel. Instead, you should use a special stainless steel cleaner such as the vepool® anti-streak quick cleaner vapo 360 ° from vepo®. Alternatively, you can also try home remedies such as baking soda, baking powder, washing powder, dish soap or cooking oil.

Cleaning the steam extractor / cooker hood or filter - top 5 household remedies in comparison

Cleaning the steam hood or cooker hood is not a difficult task. However, it absolutely requires the use of a suitable cleaning agent. This doesn't have to be a professional chemical based cleaner. Before resorting to a special detergent, you can first try some simple home remedies that you usually have on hand at home.

lemon

The acidity and juice of lemons work wonders against limescale. But they can also be helpful for many other little household problems. In the case of a dirty extractor hood, for example, lemon can help to loosen the unsightly greasy film. All you have to do is cut a lemon in half and rub the cut surface over the greasy surface of the extractor hood. You should then wipe again with clear water and polish the surface dry with a lint-free cloth or a soft microfiber cloth.

Plus point: Lemon not only has a strong cleaning effect, it also creates a pleasantly fresh smell in the kitchen.

Baking powder or baking soda

Baking powder and baking soda are real all-rounders in the household. For example, they can help with cleaning the refrigerator, get dirty and smelly washing machines clean or make leather care easier. To clean the extractor hood with baking powder or baking soda, proceed as follows:

Mix the baking soda or baking powder with a little water to make a creamy paste. You rub this mixture on the extractor hood and leave it there for some time. Then remove the paste with a damp cloth and wipe with clear water. Finally, polish the surface dry.

soda

Soda is also a real miracle cure in the household. For example, the powdery household remedy can be used excellently to clean the shower or toilet. But soda can be useful not only in the bathroom, but also in the kitchen. In principle, soda acts as a cleaning agent in a similar way to baking powder or baking soda, which is why you should clean the extractor hood in the same way as with these household remedies.

Dish soap or washing powder

The easiest way to clean the steam extractor hood without special cleaning agents is to clean it with detergent. In combination with warm water, this simple home remedy is often completely sufficient. Washing powder has an even stronger effect and fat dissolving power. For a clean result, all you have to do is mix a little washing powder with water to a paste. You then apply this to the steam extractor hood and rub it in with a cloth. Then rinse the surface with clear water.

Detergents and detergents are also suitable for cleaning the steam vent.

Cooking oil

Cleaning a greasy extractor hood with cooking oil? What sounds paradoxical is actually quite effective. Although the oil makes the extractor hood even more greasy at first, it still dissolves grease residues and can make greasy surfaces shine again, just as you know it from cleaning windows.

Manual:

  1. Drizzle some cooking oil (rapeseed or sunflower oil) onto a few sheets of kitchen roll.
  2. Use it to wipe the dirty surface in a circular motion.
  3. Then clean the surface with warm water and washing-up liquid.
  4. Finally, buff the surface dry with a microfiber cloth.

Alternatively, baby wipes can be used. These also often contain oil, so wet wipes replace the combination of cooking oil and kitchen roll. It is important that you must not throw these wipes in the toilet under any circumstances.

Top 5 home remedies for cleaning the cooker hood

Remove grease from the steam vent with Krust-Ex® Dirt + Degreaser from vepo®

For time-saving and gentle cleaning of your steam extractor hood or if cleaning has not been done for a long time, it is best to use professional cleaning agents with an extra-strong effect. Krust-ex® Schmutz + Fettlöser Spray from vepo® emulsifies fat immediately and removes fat deposits on the steam extractor hood in the kitchen very reliably. This degreaser also has an antibacterial effect. Even dried and pitchy grease and dirt deposits can be removed very gently with the reddish cleaning foam Krust-Ex® Dirt + Degreaser Vapo. The handy 360 ° professional spray gun can be reused for a very long time on the inexpensive Krust-ex® Schmutz + Fettlöser replacement pack.

To do this, proceed as follows:

  1. Open the nozzle
  2. Spray the product on the steam vent, close the nozzle
  3. Let the product take effect until the dirt is removed
  4. Clean the surface with warm water and a cloth
  5. dry and, if desired, impregnate against signs of use

Important NOTE: Unlike many other cleaners, Krust-ex® Schmutz + Fettlöser can also be used on aluminum and many water-compatible surfaces.

Impregnate the steam vent against signs of use with vepocleaner® stain protection from vepo®

Steam extractor hoods made of aluminum or brushed chrome steel are very susceptible to signs of wiping and wear. We have developed the vepocleaner® stain protection so that these sensitive materials are easier to care for and can be easily wiped off with a spray cleaner such as vepool® anti-streaks quick cleaner from vepo®. This surface impregnation, which can also be used for floors and walls indoors and outdoors, can be spread well on aluminum, chrome steel and other materials that have to be cleaned frequently and ensures unique protection and ease of care.

Bring the steam extractor to shine without streaks with vepool® Anti-Stripe Quick Cleaner Vapo from vepo®

To ensure that the steam hood always shines flawlessly, it should be regularly freed of fingerprints, dust and grease vapor with our vepool® anti-streak quick cleaner spray. You can even wipe the filters with it afterwards. This means that your steam extractor stays clean for much longer and cooking is even more fun. The application is very simple, time-saving and the cleaner leaves a noticeable freshness everywhere. Spray vepool® Anti-Stripes Quick Cleaner on a large area and rub with a soft microfiber cloth. The high-quality 360 ° C professional spray gun can be reused on the much cheaper replacement pack X-times.

FAQ

How often should the steam extractor be cleaned?

The steam exhaust with all individual parts should be cleaned regularly. The exact intervals depend on the frequency of use of the steam vent and the use of fat. By running your finger over the filters, you can quickly see whether external cleaning is required. If grease is already dripping down, thorough cleaning is definitely indicated.With the proven, fat-emulsifying Krust-ex® dirt + degreaser from vepo® with an antibacterial effect, you can quickly and easily restore full performance to your steam extractor.

What is the best way to remove fat from the steam vent?

First of all, you can try to remove the grease using simple means like dish soap. Alternatively, a lemon, which you cut open and rub with the cut surface over the soiled surface, can help. For heavier soiling and heavy fat deposits, special grease cleaners are available, which have a high level of effectiveness. Krust-ex® Schmutz + Fettlöser Vapo 360 ° from vepo® achieves particularly good effects.

How do you get a stainless steel steam hood clean?

Stainless steel is a sensitive material, the surface of which quickly becomes dull when treated with harsh cleaning agents. You should therefore keep your hands off aggressive cleaning agents when cleaning stainless steel steam extractors in order not to damage the material. It is better to use a special stainless steel cleaner. Alternatively, you can try home remedies such as oil or baking soda. Impregnation with vepocleaner® stain protection from vepo® for maximum ease of care has proven itself on very sensitive stainless steel.

Can you clean activated charcoal filters in the fume cupboard?

That depends on the model. The conventional activated charcoal filters can usually not be cleaned, but must be replaced. This should be done about every three to six months. There are now hoods with reusable activated carbon filters that can be cleaned several times and thus last three to four years.